The rotary feeder has the advantages of simple structure, light weight, small volume, low noise, convenient installation, convenient maintenance, stable amplitude, reliable operation, stable parking, high working efficiency, large feeding amount, low power consumption, low operating cost, and has been applied in many industries. However, many customers have some misunderstandings when using this device. Here are two common misunderstandings.

1、認為料斗供料器可以代替?zhèn)冉o料機。與傳統的固體料斗供料器相比，側給料機擁有耐磨、螺桿扭矩高、嚙合螺釘全以及傳遞扭矩的是金屬齒輪而不是尼龍齒輪等優點。當料斗供料器作為供料器的給料側時，僅運行三、四天就會損壞。因此，如果旋轉供料器廠家說他的料斗供料器可以作為側給料器使用，應該要求他出具相應的設備性能和使用壽命的書面保證書，以更大程度上保證我們的利益。

1. It is considered that the hopper feeder can replace the side feeder. Compared with the traditional solid hopper feeder, the side feeder has the advantages of wear resistance, high screw torque, full engagement screws, and metal gear rather than nylon gear to transmit torque. When the hopper feeder is used as the feeding side of the feeder, it will be damaged after only three or four days of operation. Therefore, if the manufacturer of the rotary feeder says that his hopper feeder can be used as a side feeder, he should be required to issue a written guarantee of the corresponding equipment performance and service life to ensure our interests to a greater extent.

2、減重補償式供料器的精度遠高于容積式供料器，與物料匹配的容積式供料器所具備的性能與重量式供料器相同，甚比不匹配的重量式供料器性能更好。減重補償是對供料器進行控制和測試的一種機制。如果旋轉供料器不能連續地將物料從進料斗轉移到輸送機螺桿或皮帶上，在減重補償方面就會存在一定的設計缺陷。每個重量損失補償給料機應該都能夠以體積方式操作。在評價不同的給料系統時，如果是螺旋供料器，除了用重量損失補償控制降低系統的不穩定性外，每個供料器都應以體積的方式進行精度檢查，以確定其固有精度。

2. The accuracy of the weight reducing compensating feeder is much higher than that of the volumetric feeder. The volumetric feeder matched with the material has the same performance as the weight feeder, or even better performance than the unmatched weight feeder. Weight loss compensation is a mechanism for controlling and testing the feeder. If the rotary feeder can not continuously transfer materials from the feed hopper to the conveyor screw or belt, there will be some design defects in weight loss compensation. Each weight loss compensating feeder shall be capable of operating in a volumetric manner. When evaluating different feeding systems, if it is a spiral feeder, in addition to reducing the instability of the system by weight loss compensation control, each feeder shall be checked for accuracy in the form of volume to determine its inherent accuracy.

以上就是為大家介紹的有關江西高密封旋轉供料器詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://lzdbgs.com.cn/

The above is a detailed introduction of Jiangxi high seal rotary feeder for you. I hope it will be helpful to you. If you have any questions, please contact us. We will provide you with our attitude http://lzdbgs.com.cn/