水產養殖增氧鼓風機工作原理
Working principle of aerator for aquaculture
接通電源后,風機旋轉,因?yàn)槿~輪有凹槽設計,會帶動空氣流動,所以空氣通過進風口處進入泵體內,空氣在里面攪動,每個凹槽經過漩渦式的增壓,一道一道的循環增壓而形成強大的氣流能量,通過出氣口排出泵體外,以供使用。
After the power is turned on, the fan rotates. Because the impeller has a groove design, it will drive the air to flow. Therefore, the air enters the pump body through the air inlet, and the air stirs in it. Each groove is pressurized in a whirlpool manner, and pressurized circularly one by one to form a strong air flow energy, which is discharged from the pump body through the air outlet for use.
水產養殖增氧鼓風機特點
Characteristics of aerator for aquaculture
1、產量提高顯著。曝氣式增氧機具對水體增氧效果好,不會把水體攪渾和傷及魚苗、蝦苗、蟹苗,使魚、蝦、蟹保持旺盛的代謝,成活率高。同時,由于底層增氧機管道分布均勻,可適當提高魚、蝦、蟹的養殖密度。 2、發生氣泡小,分布均勻溶解氧氣量大,特別對水體底部增氧效果明顯。曝氣管在水底部產生“V”型霧化氣泡流,在水深2米時,霧化氣泡寬度可達3-4米。盤式曝氣增氧設備在水底產生漩渦霧化氣泡流,一個直徑1.2米的盤式曝氣增氧設備增氧面積可達350
1. The output increased significantly. The aerated aerator has good oxygenation effect on the water body. It will not muddy the water body and damage the fish fry, shrimp fry and crab fry, so that the fish, shrimp and crab can maintain vigorous metabolism and high survival rate. At the same time, because the bottom aerator pipes are evenly distributed, the breeding density of fish, shrimp and crab can be appropriately increased. 2. Small bubbles, uniform distribution and large amount of dissolved oxygen, especially for the bottom of the water body. The aeration pipe generates a "V" shaped atomized bubble flow at the bottom of the water. When the water depth is 2 meters, the atomized bubble width can reach 3-4 meters. The disc aerator generates vortex atomized bubble flow at the bottom of the water. The oxygenation area of a disc aerator with a diameter of 1.2m can reach 350 square meters
高壓曝氣風機主要用途
Main uses of high pressure aeration fan
1、工業攪拌曝氣、清洗曝氣、水處理鼓風曝氣、水產養殖曝氣、增氧、河道治理曝氣等;
1. Industrial mixing aeration, cleaning aeration, water treatment blast aeration, aquaculture aeration, oxygenation, river treatment aeration, etc;
2、醫院、實驗室的污水?dāng)嚢杵貧猓?/div>
2. Sewage mixing and aeration in hospitals and laboratories;
3、印刷行業的真空送紙。
3. Vacuum paper feeding in printing industry.
4、電鍍槽、工業廢水的攪拌曝氣;
4. Agitation and aeration of electroplating tank and industrial wastewater;
5、塑焊、吹風的氣源供應;
5. Air supply for plastic welding and blowing;
6、燃燒器的噴霧、玻璃工業;
6. Spray and glass industry of burners;
7、水產養殖;
7. Aquaculture;
8、物料、生物、生化池等發酵曝氣;
8. Fermentation aeration of material, biological and biochemical tanks;
9、需要?dú)庠吹钠渌O(shè)備。
9. Other equipment requiring air supply.
The wonderful content of this article is provided by Hubei aquatic oxygenation equipment. There are many wonderful content on this website. You can click to enter more content: http://lzdbgs.com.cn/ We have special customer service to answer your questions