The pneumatic conveying principle of powder materials is that the powder materials are mixed with air to form a specific concentration of gas-solid mixture, which enters the conveying pipeline under the action of differential pressure, and the gas-solid mixture is pushed forward along the pipeline to the receiving bin. The solid materials fall into the receiving bin under gravity, and the air is filtered by the dust collector on the top of the bin and discharged into the atmosphere to realize gas-solid separation and achieve the purpose of long-distance conveying of powder materials.

粉粒物料氣力輸送系統，工藝要求各有不同，是按實際工況通過量身定制而設計的智能化粉體輸送裝備。主要分為；高正壓、低正壓、真空負壓。

The pneumatic conveying system for powder materials has different process requirements. It is an intelligent powder conveying equipment designed according to the actual working conditions. Mainly divided into; High positive pressure, low positive pressure, vacuum negative pressure.

高正壓輸送設備有；上引式粉體輸送泵、中引式粉體輸送泵、下引式粉體輸送泵、濃相粉體輸送泵、灰碴輸送泵、粉體計量輸送泵、高爐煤粉噴吹泵、恒量可調粉體輸送泵等。

High positive pressure conveying equipment:; Up lead powder conveying pump, middle lead powder conveying pump, down lead powder conveying pump, dense phase powder conveying pump, ash slag conveying pump, powder metering conveying pump, blast furnace pulverized coal injection pump, constant adjustable powder conveying pump, etc.

低正壓輸送設備有；低壓連續輸送泵、低壓螺旋輸送泵、窯爐粉體噴吹泵等。

Low positive pressure conveying equipment:; Low pressure continuous conveying pump, low pressure spiral conveying pump, kiln powder injection pump, etc.

負壓輸送設備有；真空負壓粉體輸送泵，粉體真空負壓卸船機，真空負壓吸塵等。

Negative pressure conveying equipment:; Vacuum negative pressure powder conveying pump, powder vacuum negative pressure ship unloader, vacuum negative pressure dust collection, etc.

粉粒物料輸送設計原則，根據物料特性（比如：物料堆比重、細度、莫氏硬度、含水率、安息角、溫度）等系列參數，物料輸送量、輸送距離、氣固比、管內流速、管道轉向方式、彎頭數量、輸送高度、受料倉形式，上下游工藝，智能化控制等相關要求而設計的。

The design principle of powder material conveying is designed according to a series of parameters such as material characteristics (such as material pile specific gravity, fineness, Mohs hardness, moisture content, rest angle and temperature), material conveying capacity, conveying distance, gas-solid ratio, flow rate in the pipe, pipeline steering mode, number of elbows, conveying height, silo form, upstream and downstream process, intelligent control and other relevant requirements.

物料高濃度輸送，固比高，氣比低，耗氣量相應降低，則空壓機能耗也相應降低，物料低濃度輸送，固比較低，氣比較高，耗氣量相應增加，則空壓機能耗也相應增加。在粉體氣力輸送系統設計中，須綜合物料特性、輸送距離、彎頭數量、輸送高度等因數，適當提高輸送濃度，使系統更。在輸送距離較遠，彎頭較多，垂直輸送較高的工況中，不建議將輸送濃度設計過高，容易產生堵管現象。

When the material is transported with high concentration, the solid ratio is high, the gas ratio is low, and the gas consumption is reduced accordingly, the energy consumption of the air compressor is also reduced accordingly. When the material is transported with low concentration, the solid ratio is low, the gas ratio is high, and the gas consumption is increased accordingly, the energy consumption of the air compressor is also increased accordingly. In the design of powder pneumatic conveying system, the factors such as material characteristics, conveying distance, number of elbows and conveying height must be integrated to appropriately improve the conveying concentration and make the system more energy-saving. Under the conditions of long conveying distance, more elbows and high vertical conveying, it is not recommended to design the conveying concentration too high, which is easy to cause pipe blockage.

掌握氣力輸送系統核心技術也是達到物料濃相輸送的關鍵，從目前看，有外旁路式，內套管式，氣刀式等，輸送工況不同則技術方案不同。

Mastering the core technology of pneumatic conveying system is also the key to achieve dense phase energy-saving conveying of materials. At present, there are external bypass type, internal casing type, air knife type, etc. the technical schemes are different under different conveying conditions.

以上就是云南粉體輸送設計方案http://lzdbgs.com.cn/為大家介紹的內容，感謝您在百忙之中查看我公司的信息內容，如果您想要了解的更多，歡迎您來電進行咨詢!

The above is the design scheme of powder conveying in Yunnan http://lzdbgs.com.cn/ Thank you for checking the information of our company in your busy schedule. If you want to know more, you are welcome to inquire!