羅茨鼓風機在啟動開機前應做好幾項準備工作,小編在下面的文章中就給您介紹一下應做好哪些準備工作:
Before starting Roots blower, several preparations should be made. The following article will introduce what preparations should be made:
1、清理干凈周圍雜物,保持風機兩米范圍內無雜物;
1. Clean up the sundries around and keep no sundries within two meters of the fan;
2、檢查電氣部分以及降壓啟動設備是否完好;
2. Check whether electrical parts and step-down starting equipment are in good condition;
3、檢查檢修工具是否齊備,消防滅火器材是否充足完備。
3. Check whether the maintenance tools are complete and whether the fire fighting equipment are sufficient and complete.
4、完全打開進氣調節閥,出氣調節閥以及旁通管;
4. Fully open the inlet control valve, outlet control valve and bypass pipe;
5、檢查進風口空氣濾清器是否通暢,濾清器是否完全打開;
5. Check whether the air inlet filter is unobstructed and whether the filter is fully opened;
6、檢查管道、閥門、消聲器、空氣濾清器支撐是否穩固,不得有負荷力加在機殼上;
6. Check whether the supports of pipes, valves, mufflers and air filters are stable, and no load shall be applied to the casing;
7、檢查潤滑油是否良好,型號是否合適,潤滑油層深度應達到規定油線以上3~5厘米,冷卻水系統是否暢通;
7. Check whether the lubricating oil is in good condition, whether the model is appropriate, whether the depth of lubricating oil layer is 3~5cm above the specified oil line, and whether the cooling water system is unblocked;
8、撥動聯軸器、檢查葉輪轉運是否靈適,有無摩擦碰撞;
8. Turn the coupling and check whether the impeller is flexible and free of friction and collision;
9、檢查各部位聯接是否良好,有無松動;
9. Check whether all parts are well connected and loose;
The above is a detailed introduction to Shandong Roots blower, and I hope it will be helpful to you. If you have any questions, please contact us. We will provide you with professional service http://lzdbgs.com.cn/