小編給大家介紹一下詳細解說回轉式鼓風機的性能結構!
Xiaobian will introduce to you a detailed explanation of the performance structure of the rotary blower!
回轉式鼓風機效率高,功耗低。風扇轉子采用特殊設計,嚙合曲線是的復合型線,密封,泄漏少,容積效率進一步提高。開始使用時,要注意材料流的情況,調整板,調整材料流通過的截面的大小,從而實現材料流速度的控制。
The rotary blower has high efficiency and low power consumption. The fan rotor adopts a special design, and the meshing curve is an advanced composite line, which is sealed, has less leakage, and the volumetric efficiency is further improved. At the beginning of use, pay attention to the material flow, adjust the plate, and adjust the size of the section through which the material flow passes, so as to realize the control of the material flow speed.
回轉式鼓風機的配套電機容量選擇較大。
The supporting motor capacity of the rotary blower is relatively large.
回轉式風扇噪音低的風扇的進排氣口采用螺旋結構,使風扇的進排氣隨著轉子的回轉而逐漸進行,避免了舊式風扇瞬間開閉帶來的脈動和噪音,回轉式風扇運轉平穩,噪音低的風扇產品組的消音器在前面
The intake and exhaust ports of the low-noise fan of the rotary fan adopt a spiral structure, so that the intake and exhaust of the fan gradually proceed with the rotation of the rotor, avoiding the pulsation and noise caused by the instantaneous opening and closing of the old fan. The rotary fan operates smoothly, and the silencer of the low-noise fan product group is in front
回轉式鼓風機運轉平穩,沒有振動。公司采用的葉輪加工專用加工中心,在使轉子嚙合間隙均勻,形成平衡狀態的基礎上,風扇轉子經過更精密的動平衡實驗,幾乎不使風扇運轉振動。回轉式鼓風機安裝前需要檢查通風層是否破損或被雨水浸泡等現象。存在時,請不要造成串風或堵塞。風扇離溢流式減震器很遠時,請務必支撐連接管道,以免產生振動。以上是回轉式鼓風機性能結構的知識??吹竭@個,我相信大家對回轉式鼓風機更了解。
The rotary blower operates smoothly without vibration. The company adopts an advanced special machining center for impeller processing. On the basis of making the meshing clearance of the rotor uniform and forming a balanced state, the fan rotor has undergone more precise dynamic balance experiments, which hardly makes the fan run and vibrate. Before installing the rotary blower, it is necessary to check whether the ventilation layer is damaged or soaked by rain. When it exists, please do not cause cross ventilation or blockage. When the fan is far away from the overflow shock absorber, be sure to support the connecting pipe to avoid vibration. The above is the knowledge of the performance structure of the rotary blower. Seeing this, I believe you have a better understanding of the rotary blower.
The above is a detailed introduction about Hunan low noise rotary fan. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://lzdbgs.com.cn/